Multicom 5 Plus with Temp Sensor
ETHERNET | GPRS | GSM | PSTN | PFP COMMUNICATIONS DEVICE
Combines security & temperature monitoring into one device.
The MC5P-TEMP monitors both alarm and temperature events. The temperature monitoring is unique because its non-disruptive to the monitoring center in the way the alarms are handled. With support for up to eight temperature sensors and total bus distance of over half a kilometre, the Temp Sensor can cater for small premises with a single refrigerator up to large warehouses with multiple cool rooms.
By attaching the optional temperature probe (MCTS) to the Multicom Temp Sensor you can monitor any type of heating or cooling devices such as – fridges, freezers, cool rooms, bain-maries, vats etc.
- Compatible with all 3rd party alarm panels and fire systems
- Up to 8 sensors (-10 degrees C to + 85 degrees C)
- Fully managed network with guaranteed 99.99% uptime
- Guaranteed fault notification within 1-hour
- Automatic remote system updates to your Multicom
- Developed and supported in Australia
- 24/7 Partner tech support Australia-wide
- Compatible with any type of Internet
|Alarm Format||Contact ID, Multicom Network|
|Alarm Reporting||Connection and Power Fault, Programming Update / Access, Tamper, Test Report, Zone 1 to 2 (24 hour), Zone Lockout|
|Communication Paths||4G/3G, Ethernet, Bluetooth, SMS, Serial, PFP, PSTN|
|Inputs||4 x 24 hr alarm inputs with programmable EOL resistors, Dedicated Tamper Input|
|Outputs||2 x programmable dry relay contacts|
|Polling Plan||Class 2+, Class 2, Class 3, Class 4, Class 5|
|Power Supply||16V AC, 50Hz Adaptor|
|SIM Options||Dual or Single|
Compatible with AlarmLINK
AlarmLINK for iPhone and Android devices lets you connect and control your home and business’ alarm system from anywhere in the world. It lets you, as well as the people you choose, control your alarm system. You can setup multiple sites and switch between them with ease. Access to your alarm system is protected via permissions based security as well as an optional passcode.
Compatible with TechTools
TechTools is comprehensive tool that allows technicians to manage, configure and commission Multicom alarm communicators in the field, in real-time from a PC, Apple or Andriod device.
TechTools utilises a powerful, easy-to-use permission-based security structure to protect devices from unauthorised access.
Multicom Talks Low Power
At Multicom, we get challenged from time to time on the question about “power consumption.” We have responded to the challenge and, in each new generation of alarm communicators, we have significantly decreased power consumption. This product evolution commenced in 2017 and has carried through to today’s Multicom alarm communicators.